manufacturer category series package voltage class rev . date ecliptek corp. oscillator EP15E7 ceramic 2.5v os5n 10/07 EP15E7 series oscillator EP15E7 electrical specifications 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. ? rohs compliant (pb-free) ? epo? programmable oscillators ? ceramic surface mount package ? lvhcmos output ? 2.5v supply voltage ? stability to 25ppm ? available on tape & reel ? tri-state and power down funtions available h 1.05 l 3.2 w 2.5 -20c to 70c or -40c to 85c -55c to 125c 2.5v dc 5% 10ma maximum 12ma maximum 14ma maximum 17ma maximum 25ppm, 50ppm or 100ppm maximum 90% of v dd minimum 10% of v dd maximum 6nseconds maximum 4nseconds maximum 2nseconds maximum 50 5(%) 30pf hcmos load maximum 15pf hcmos load maximum tri-state or power down enables output enables output disables output 30a maximum 6ma maximum 350psec maximum 200psec maximum 5ppm/year maximum 10msec maximum nominal frequency operating temperature range storage temperature range supply voltage (v dd ) input current frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time duty cycle load drive capability pad 1 connection pad 1 input voltage standby current disable current absolute clock jitter aging at 25 start up time 3.300mhz to 25.000mhz 25.001mhz to 50.000mhz 50.001mhz to 75.000mhz 75.001mhz to 88.000mhz inclusive of all conditions: calibration tolerance at 25c , frequency stability over the operating temperature range, supply voltage change, output load change, 1st year aging at 25c, 260c reflow, shock, and vibration i oh = -8ma i ol = +8ma 3.300mhz to 50.000mhz, 20% to 80% of waveform 50.001mhz to 75.000mhz, 20% to 80% of waveform 75.001mhz to 88.000mhz, 20% to 80% of waveform at 50% of waveform 3.300mhz to 50.000mhz 50.001mhz to 88.000mhz v ih of 90% of v dd minimum no connection v il of 10% of v dd maximum disabled output (logic low) disabled output (high impedance) 3.300mhz to 24.999999mhz 25.000mhz to 88.000mhz 3.300mhz, 3.6864mhz, 5.000mhz, 6.000mhz, 7.000mhz, 8.000mhz, 9.000mhz, 10.000mhz, 12.000mhz, 16.000mhz , 20.000mhz, 24.000mhz, 25.000mhz, 26.000mhz, 27.000mhz, 30.000mhz, 33.000mhz, 33.333mhz, 37.500mhz, 40.000mhz, 52.000mhz, 66.000mhz, 70.000mhz, 75.000mhz, 80.000mhz, 83.000mhz, and 88.000mhz
manufacturer category series package voltage class rev . date ecliptek corp. oscillator EP15E7 ceramic 2.5v os5n 10/07 mechanical dimensions all dimensions in millimeters environmental/mechanical specifications tape and reel dimensions all dimensions in millimeters suggested solder pad layout all dimensions in millimeters 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. EP15E7 h 2 h - 40.000m tr part numbering guide available options blank=bulk tr=tape and reel (standard) frequency logic control/additional output h=tri-state j=power down frequency tolerance & stability/ operating temperature range c=100ppm maximum over -20c to +70c d=50ppm maximum over -20c to +70c e=25ppm maximum over -20c to +70c g=100ppm maximum over -40c to +85c h=50ppm maximum over -40c to +85c duty cycle 2=50% 5% *compliant to eia 481c tolerances= +0.1 characteristic specification esd susceptibility mil-std-883, method 3015, class 1, hbm: 1500vdc fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-883, method 2002, condition b moisture resistance mil-std-883, method 1004 moisture sensitivity j-std-020, msl 1 resistance to soldering heat mil-std-202, method 210, condition k resistance to solvents mil-std-202, method 215 solderability mil-std-883, method 2003 temperature cycling mil-std-883, method 1010, condition b thermal shock mil-std-883, method 1011, condition b vibration mil-std-883, method 2007, condition a pin 1: tri-state or power down pin 2: case ground pin 3: output pin 4: supply voltage a b c d e f 12.0 0.3 5.5 0.05 4.75 0.1 4.0 0.1 2.00 0.05 f g h j k l 4.0 0.1 a0* 1.5 +.1/-0 b0* 0.6 max k0* m n o p q 1.5 min 50 min 20.2 min 13+.5/-.2 40 min r s t u v qty/reel 2.5 min 10 min 18.4 max 332 max 12.4 +2/-0 1,000 reel plastic mems first? is a registered trademark of sitime corporation. 2.50 0.15 3.20 0.15 1.05 0.15 0.75 0.10 (x4) 1.20 0.10 1.00 0.10 1.00 0.10 1 2 3 4 marking orientation
ecliptek mems oscillators - lower cost, quicker delivery alternative! the emo? family of oscillators offers exceptiona l performance, shorter delivery and significant cost advantages by utilizing a revolutionary new mems resonator tec hnology. this important innovation enables ecliptek to offer the ultimate in flexibility with delivery of 2 days for samples and 5 to 10 days for quantities up to 10,000 pieces on tape and reel. package dimensions (all dimensions in millimeters) supply voltage (v dc ) 5 x 7 3.2 x 5 2.5 x 3.2 2 x 2.5 1.8 emk11 emk21 emk31 emk41 2.5 emk12 emk22 emk32 emk42 3.3 emk13 emk23 emk33 emk43 would you like to request emo? samples or a quotation now? click here want to learn more about the ecliptek emo? family of mems oscillators? click here product features: ? improved frequency stability throug h the use of a mems resonator ? 1.8vdc, 2.5vdc, or 3.3vdc supply voltages ? frequency range of 1mhz to 125mhz, hcmos output ? frequency stability to 50ppm, -40c to +85c operation ? tri-state or power down functions ? rohs compliant ? high temperature +260c reflow capability ? eia compliant tape and reel packaging ? four smd package sizes if you have any questions or would like additional information regarding the ecliptek emo? family of oscillators, please contact our sales department .
|
